Tp-Link Login | tplinklogin.net

Tp-Link Login Admin pannel

Tp-Link Login | tplinklogin.net is the Admin Panel page for TP-Link Router from where you’ll change the default settings of the router and wireless network.tplinklogin.net are often accessed only you’re not connected to the TP-Link router either wirelessly or through a cable, otherwise, this website can not be accessed.you’ll use this webpage to try to make changes to the settings of your TP-Link Router.

  • 192.168.0.1
  • 192.168.1.1

192.168.0.1

192.168.0.1 is the default Bypass that is used by routers and modems such as Tp-Link as the default IP address for logging the admin panel. 192.168.0.1 can be used to configure basic and advanced settings.

192.168.1.1

192.168.1.1 This is the Ip address of your router is a different binary identification number that all other devices on your network would use to communicate with the router, to locally receive and forward data, and to get the Internet access.

TP-Link Login – tplinklogin.net

There are various types of steps but this method easy for you. these steps to log in to the Tp-Link Router Panel. Make sure you that you’re connected to the Tp-Link Network, either wifi networks or through an Ethernet cable.

  1. first up all Open your web browser.
  2. In the URL bar, type http://192.168.0.1 or http://tplinklogin.net (default gateway IP address for TP-Link).
  3. A login page for Tp-Link Router will appear asking you to enter the username and password. Note: The default username and password are “admin” in lowercase letters.
  4. After entering the username and password, you will be logged in into the TP-Link Admin Panel tplinklogin.net.

Unable to Login / Troubleshooting

Are you unable to login to the Admin Panel using the default login credentials, then it may be that someone might have changed the password or the default login credentials for your model might be different? you can try to look for the label below your router, the default login credentials are usually mentioned there. If there are not working then you can try to factory reset your router, which will reset every setting to default.

To factory reset your router:

Take a needle and press and hold the hidden Reset Button on the back of your router for 05-10 seconds.
The router will reboot itself, after which everything will be ok then back to the default settings. You can then log in using the default login & password credentials.